Axial Fans

HC

HC

Wall mounted axial fans with IP55 motor

Wall mounted axial fans with fibreglass reinforced plastic propeller.

Fan:
• Steel sheet support frame.
• Fibreglass reinforced polyamide-6 impeller.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Models 71, 80, 90 and 100: The protection grid is supplied as an accessory.
• Airflow direction from motor to impeller.

Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings. IP55 protection. Except single-phase models from size 45 to size 63, with IP54 protection. 1 or 2 speeds depending on model.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +60 ºC.

Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.

On request:
• Motor, impeller and grille assembly (F version), except models 71, 80, 90 and 100, which are supplied without a grille.
• Motor, impeller assembly (version G).
• Airflow direction from impeller to motor.
• Special windings for different voltages.