Centrifugal Fans for Industrial Applications - Small Series
CMAT
Centrifugal fans of medium pressure and single inlet, with straight bladed impeller, for the transport of dust and solid material
Fan:
• Cast aluminium casing.
• Straight blade impeller in cast aluminium in models 324 to 531 and in sheet steel in models 540 to 545.
• Maximum temperature of air to be carried: -25 ºC +120 ºC.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz.
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Special windings for different voltages.
• Fan prepared to transport air up to +250 ºC.
• ATEX certified Category 2.
• Cast aluminium casing.
• Straight blade impeller in cast aluminium in models 324 to 531 and in sheet steel in models 540 to 545.
• Maximum temperature of air to be carried: -25 ºC +120 ºC.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz.
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Special windings for different voltages.
• Fan prepared to transport air up to +250 ºC.
• ATEX certified Category 2.