HCT/IMP
Long range, one way or reversible Jet fans
Long range one way or reversible Jet fans with an octagonal design for air movement and CO extraction in car parks.
Fan:
• Unidirectional or reversible fan assembly consisting of fan, silencers, deflectors and supports.
• Fiberglass reinforced Polyamide-6 impellers, except 50-2T models in aluminium.
• Adjustable impeller designed to obtain great thrusts.
• Protection grid against contacts according to the UNE-EN ISO 12499 standard in unidirectional models.
• Deflector for increased air reach, on the outlet side. Reversible models are equipped with deflectors on both sides.
• High attenuation silencers with thermal and acoustic insulation.
• INT series safety switch built into the fan (HCT/IMP-L).
• Airflow direction from motor to impeller or 100% reversible.
• HCT/IMP-L: Galvanised sheet steel casing.
• HCT/IMP-LS: Casing of reduced length, in galvanised sheet steel.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection. 1 or 2 speeds depending on the model.
• Three-phase 230/400 V 50 Hz.
• Working temperature: -25 ºC +40 ºC.
Finish:
• Galvanised steel sheet.
On request:
• Thrust performance other than those indicated.
• Version approved for smoke evacuation according to EN 12101-3 standard (see THT/IMP series).
Fan:
• Unidirectional or reversible fan assembly consisting of fan, silencers, deflectors and supports.
• Fiberglass reinforced Polyamide-6 impellers, except 50-2T models in aluminium.
• Adjustable impeller designed to obtain great thrusts.
• Protection grid against contacts according to the UNE-EN ISO 12499 standard in unidirectional models.
• Deflector for increased air reach, on the outlet side. Reversible models are equipped with deflectors on both sides.
• High attenuation silencers with thermal and acoustic insulation.
• INT series safety switch built into the fan (HCT/IMP-L).
• Airflow direction from motor to impeller or 100% reversible.
• HCT/IMP-L: Galvanised sheet steel casing.
• HCT/IMP-LS: Casing of reduced length, in galvanised sheet steel.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection. 1 or 2 speeds depending on the model.
• Three-phase 230/400 V 50 Hz.
• Working temperature: -25 ºC +40 ºC.
Finish:
• Galvanised steel sheet.
On request:
• Thrust performance other than those indicated.
• Version approved for smoke evacuation according to EN 12101-3 standard (see THT/IMP series).