Centrifugal Fans for Industrial Applications - Small Series
PORT
Extremely robust, high power portable air extractors
Fan:
• Portable extractor with high aspiration power.
• For the extraction of dirty and dusty air in facilities where extraction is required in an intermittent and mobile way, specially designed for industrial and agricultural applications.
• Maximum temperature of air to be carried: -25 ºC +120 ºC.
Constructive features:
• Thick steel sheet casing.
• Very robust backward curved impeller.
• Support bench with long lasting wheels.
• Circular outlet flange included.
• Inlet protection grid included.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Special windings for different voltages.
• Fan prepared to transport air up to +250 ºC.
• Stainless steel fan.
• ATEX certification.
• Portable extractor with high aspiration power.
• For the extraction of dirty and dusty air in facilities where extraction is required in an intermittent and mobile way, specially designed for industrial and agricultural applications.
• Maximum temperature of air to be carried: -25 ºC +120 ºC.
Constructive features:
• Thick steel sheet casing.
• Very robust backward curved impeller.
• Support bench with long lasting wheels.
• Circular outlet flange included.
• Inlet protection grid included.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Special windings for different voltages.
• Fan prepared to transport air up to +250 ºC.
• Stainless steel fan.
• ATEX certification.