Axial Fans EC Technology
HC/EC
Wall mounted axial fans, with EC Technology IE5 motor
Wall mounted axial fans with EC Technology IE5 motor with integrated electronics, specially designed for high energy efficiency.
Fan:
• Airflow direction from motor to impeller.
• Fibreglass reinforced polyamide-6 impeller.
• Steel sheet support frame.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Models 71, 80, 90 and 100: The protection grid is supplied as an accessory.
Motor:
• High efficiency EC Technology motors with integrated electronics, regulated by 0-10 V or 4-20 mA.
• IE5 efficiency motors, class F and IP55 protection.
• Single-phase 220-277 V 50/60 Hz and three-phase 380-480 V 50/60 Hz.
• Working temperature: -20 ºC +60 ºC.
• Modbus RTU and built-in alarm relay (three-phase models).
EC CONTROL:
Supplied as an optional accessory. Control panel for ventilation systems with EC Technology motors with the electronics integrated in the motor itself. With the following characteristics:
• CPC: Constant pressure control.
• CFC: Constant flow control.
• DAY/NIGHT: Double pressure setpoint adjustment according to time of day.
• External sensor: Compatible with temperature, humidity, air quality or CO sensor.
• Equipment preconfigured in constant pressure mode with 100 Pa set point.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Airflow direction from impeller to motor.
• Motor, impeller and grille assembly (F version), except models 71, 80, 90 and 100, which are supplied without a grille.
• Motor and impeller assembly, version G.
Fan:
• Airflow direction from motor to impeller.
• Fibreglass reinforced polyamide-6 impeller.
• Steel sheet support frame.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Models 71, 80, 90 and 100: The protection grid is supplied as an accessory.
Motor:
• High efficiency EC Technology motors with integrated electronics, regulated by 0-10 V or 4-20 mA.
• IE5 efficiency motors, class F and IP55 protection.
• Single-phase 220-277 V 50/60 Hz and three-phase 380-480 V 50/60 Hz.
• Working temperature: -20 ºC +60 ºC.
• Modbus RTU and built-in alarm relay (three-phase models).
EC CONTROL:
Supplied as an optional accessory. Control panel for ventilation systems with EC Technology motors with the electronics integrated in the motor itself. With the following characteristics:
• CPC: Constant pressure control.
• CFC: Constant flow control.
• DAY/NIGHT: Double pressure setpoint adjustment according to time of day.
• External sensor: Compatible with temperature, humidity, air quality or CO sensor.
• Equipment preconfigured in constant pressure mode with 100 Pa set point.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Airflow direction from impeller to motor.
• Motor, impeller and grille assembly (F version), except models 71, 80, 90 and 100, which are supplied without a grille.
• Motor and impeller assembly, version G.